AddPac AP2520 VoIP Betriebsanweisung PDF herunterladen (Seite 101)

PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002

AddPac Technology Co., Ltd. -

101 -

z ospf cost <cost-value>

An optional command to statically set OSPF cost value for the manager.

z ospf auth-type { simple/md5 }

An optional command to use authentication when the interface and the

router in the area where the interface belongs exchange routing

information. The manager shall set the authentication method – the

simple text method or MD5 encryption method.

z ospf auth-key <key-string>

Sets key value for authenticating routing information exchange between

the interface and the neighboring router. (This key value must be set

when authentication is used, and it must be the same with the key value of

the router in the same area.)

z ospf auth-id <key-id>

Sets key identifier for authenticating routing information exchange

between the interface and the neighboring router. (This key identifier must

be set when authentication is used, and it must be the same with the key

identifier of the neighboring router.)

z ospf priority <priority-value>

1. Decides the priority to become DR when the OSPF select

DR/BDR/Drouter between the interface and the neighboring router.

The priority range is 1 ~ 255. The higher the value is, the higher the

priority is.

2. The default is 1.

z ospf hello-interval <interval-time>

1. Sets the hello interval that the router exchanges with a neighboring

router through the interface to configure the adjacency. The hello

interval shall be the same with the hello interval of the neighboring

router.

2. The default is ten seconds. However, the default is 30 seconds in the

frame-relay network.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 367 368

Keine Kommentare

AddPac AP2520 VoIP Betriebsanweisung Seite 101