AddPac VoiceFinder AP1100 Betriebsanweisung PDF herunterladen (Seite 153)

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1

AddPac Technology Co., Ltd. -

153 -

rule 3 [1-9]…… 822%01%02%03%04%05%06%07%08

Created translation rules can be verified by “show translation-rule” command.

For example, “show translation-rule 100” command will show rules of the

translation rule set 100. To view the translation result, enter the number to test.

To check the translation result of “1234” in the translation rule set 100, enter

“show translation-rule 100 1234.” At this time, the result will be 1234.

5.3.7.2. Applying Translation Rules to the Inbound POTS Calls

To apply the translation rule set to all calls received in the voice port, make

following setting.

Step Command Description

1 Router# configure

Enters into the global configuration

mode.

2 Router(config)# voice-port

location

Enters into the designated voice port

configuration mode.

The location is indicated by the

slot-number/port-number.

3 Router(voice-port)# translate-incoming

{called-number | calling-number}

tag

called-number: Applies the

translation rule to the inbound called

party number.

calling-number: Applies the

translation rule to the inbound calling

party number.

The tag refers to the rule set and tag

values range from 0 to 65535.

If the translation rule is applied to the called party and if numbers are entered

into the voice port in order, check if translation is made for each number

entered. At this time, translation shall be made only once.

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 301 302

Keine Kommentare

AddPac VoiceFinder AP1100 Betriebsanweisung Seite 153